SYNCING THE BW1000 PORTABLE WIRELESS SYSTEM:
A simple step-by-step overview on syncing the receivers of the BW1000 with the
BW230HT/BW200BT wireless transmitters
 |
Turn on the receiver with the volume knob. |
 |
Turn the receiver to the channel you would like to use by using the 'UP' and 'DOWN' buttons. |
 |
Make sure your batteries are in the transmitter and it is powered on. |
 |
Hold the wireless transmitter close to the receiver you wish to sync it to. |
 |
Press and hold the 'ASC' button which will sync it to the transmitter. |
 |
If the transmitter is properly synced the RF indicator should be lit red. |
 |
Give it a test, if the AF indicator lights green when you speak into the transmitter, you are fully ready to broadcast. |
 |
You can sync the bodypack transmitter the same way. Choose your channel, hold the bodypack transmitter next to the receiver you wish to sync it to, hold the 'ASC' button for 3 seconds and you should be synced. |
 |
If you want to talk over the music without having to adjust the music's volume, simply flip the 'voice priority' switch. |
Have additional questions or concerns? Feel free to contact us: 972-535-8618 or This e-mail address is being protected from spambots. You need JavaScript enabled to view it.
